Comments for Serendipity Software

Comment on Printing to windows shared printers from Mac OS X by Pete Carnell

Pete Carnell — Fri, 12 Oct 2007 07:34:59 +0000

Just found a gotcha that you can fall into. I called my printer name that I made on the Mac

t1100-hostname

Every time I tried to print to it with

lpr -Pt1100-hostname test.ps

I got the following error -

lpr: error - unable to print file: client-error-not-found

Basically this means that the cups cannot find the printer. What happens is cups converts the hyphen characters ‘-’ to underscores ‘_’ - So the printer device is called t1100_hostname but the Printer utility still has the nice name you gave it.
So I needed to use

lpr -Pt1100_hostname test.ps

You can check the name that is being broadcast using

lpstat -t

Search through the list and look to see if your printer is listed and check the name. Or just make sure that you use underscores or a short name

Comment on Monitor verification to be included in 3.4/4.5 by peters

peters — Tue, 02 Oct 2007 04:45:32 +0000

On the Mac our profiler writes video luts if the user wishes to do so. On Windows it does not as not all video card drivers supported downloadable video luts. We find that doing the video luts gives a slightly better result.

The thing about the Eizo and other such monitors is that all the luts and gamma are done in hardware in the monitor. As far as the operating system is concerned the monitor is a totally linear device with a gamma of 1.0.

Comment on Monitor verification to be included in 3.4/4.5 by Roberto Michelena

Roberto Michelena — Tue, 02 Oct 2007 04:40:06 +0000

Right now there seems to be no acceptable middle ground for LCD monitors. You got the uber-cheap ones, office oriented models that sell for under $350 for a 20″ ; then you got the Apple Cinemas which are about double that price but still haven’t got the needed gamut so fail the cyan. And then you got Eizo, LaCie, Quato, Mitsubishi, etc touting displays that are all over $1800 and up to $3000 or more.
Now Dell has released a 24″ called “HC” that they say has an expanded gamut to 92% of NTSC (most LCDs are about 72%) and it’s about $650 ; don’t know if it has 10 bit DACs, but I’m quite eager to test it. May be the holy grial of a decent proofing monitor under $1000.
Pete, your calibrator is just profiling, or it does write to the video luts? or maybe even uses DDC control?

Comment on Monitor verification to be included in 3.4/4.5 by Olaf Bläsing

Olaf Bläsing — Sat, 15 Sep 2007 08:11:19 +0000

Hi Pete,

the minitor tool works fine. If you have the chance to get yourself one of the new NEC SpectraView monitors (26″ is out 30 Inch coming) ths will
be even better than the latest EIZO one. I just leaned this at the show in Stuttgart.

If you can manage to get yourself the
Ugra Display Analysis and Certification Tool
for PC and Mac
http://www.ugra.ch/index.php?session=9422325&show=299
It is worth looking at. The best analysis tool I found so far

Comment on Monitor verification to be included in 3.4/4.5 by Peter Skarpetis

Peter Skarpetis — Fri, 14 Sep 2007 00:03:44 +0000

Looking at the report I see that they used DeltaE CIE94 for all their calculations, which is more perceptually correct. I used the standard DeltaE formula typically called euclidean or CIE 1976. If I use DeltaE CIE 2000, the Apple Cinema display passes without any problems. It is up to the user to select the appropriate formula for their standards. My aim was just to provide a comparison between the different monitors rather than any absolute results.

Comment on Monitor verification to be included in 3.4/4.5 by Tom Uhing

Tom Uhing — Thu, 13 Sep 2007 15:28:05 +0000

I’ll check on that, Peter S. Since we are an authorized Mac dealer and service provider, I can find out. However, even 2 years ago, the reports from Koldenhof Grafmedia NL: http://www.colormanagement.nl/reports/index.php?acdcolor05_intro

were very positive on the Cinema Display. No doubt you’ve seen in their report their measurement of color patches on monitor vs Standard printing. I’ve used several Cinema Displays since 2006 for quality magazine publishing and the match to the press (ISO Offset Coated) was very close and very satisfactory. The price is right, too! Cheers, Tom

Comment on Monitor verification to be included in 3.4/4.5 by peters

peters — Wed, 12 Sep 2007 23:38:10 +0000

Our Apple 30 inch is about a year old. I am not sure if there has been any change in more recent models.

Comment on Web Server by Tom Uhing

Tom Uhing — Wed, 12 Sep 2007 11:55:01 +0000

Cool! Customers should love this! I hope to try it now, since I’m setting up a demo of BM 3.5 at home prior to a demo at a newspaper this coming week.
I hope it works on a DSL connection. Thanks, Tom

Comment on Monitor verification to be included in 3.4/4.5 by Tom Uhing

Tom Uhing — Wed, 12 Sep 2007 11:50:26 +0000

Thanks for a great tool! Previously not available except from high-end testing apps. No doubt the Apple 30 inch display you tested was the new Apple Cinema 30 Display? Cheers, Tom at Ynzal, your agent in Manila.

Comment on Printing to windows shared printers from Mac OS X by Printing from OSX to HP Laserjet 6L. FINALLY. « [m i a o w] the cat

Printing from OSX to HP Laserjet 6L. FINALLY. « [m i a o w] the cat — Wed, 25 Apr 2007 13:40:34 +0000

[...] But I still couldn’t print. And then, while searching for instructions that included that little trick with the option key, I found a post entitled Printing to windows shared printers from Mac OS X. I was a bit worried that I didn’t have a password to enter for my pc, but just left it out and it didn’t seem to matter. I almost fell on the floor when the printer shuffled into life. [...]